| you are: Colouring by douche
For reception of a qualitative covering by the given method it is necessary to suspend products on the conveyor so that to provide the best plaint of surpluses of a paint and, correctly having chosen viscosity of a paint and varnish material, not to suppose its change in colouring process. It is necessary further in process obliva to support at certain level - in limits 20-25°С - temperature of paint and varnish materials; the heat exchanger is applied to this purpose. Предлагаем идеальные зубчатые ремни на выгодных условиях. Консультация специалистов
Automatic devices for continuous measurement and regulation of viscosity and temperature of painting structure, concentration of steams of solvent, for maintenance of pressure of a paint in system are mounted on a control panel. Воротные системы - откатные гаражные ворота. Гаражные ворота. Бесплатно.
In the described installation the douche chamber is located horizontally, and the steam tunnel has an insignificant bias - 5-12 В°, facilitating plaint of surpluses of a paint. In installations of other type the inclined entrance tunnel is added. Steams of solvent heavier, than air, settle downwards and are as though in a bag. Them uletuchivaniju the system interferes also ohladitelnaja. Hence, colouring by douche under this scheme allows to save solvent better. Компания поставляет дизель генераторы Sdmo, Ausonia, российские генераторы.
Colouring by douche with endurance in solvent steams is applied in motor industry and in manufacture of agricultural cars. Installations for colouring by douche economic only in mass production.
Advantages of this method concern possibility of simultaneous colouring of products of a different configuration, more dense naveska details (than, for example, at dispersion) on the conveyor, improvement of quality of a covering, absence of bulky baths, drain tanks and the big capacities for paint storage. However the given method is unsuitable for drawing of last layers of decorative coverings. At douche losses of solvents because of repeated circulation of a paint also take place; it is observed fast obrastanie by a paint of a running part of the conveyor, and it causes of frequent clearing. Colouring in the different colours, connected with frequent change of materials, in such installation is complicated.
|