EN ES FR HE IT NL PL UA BY PT DE Methods of colouring of cars es fr it nl pl by ua pt de en
sections
  • Methods of drawing of paint and varnish coverings
  • Colouring by pneumatic dispersion
  • Dispersion of the warmed-up paints
  • Vacuum dispersion of paints
  • Aerosol dispersion
  • Colouring in electric field
  • Ultrasonic dispersion
  • Colouring by douche
  • Colouring okunaniem
  • Colouring by an electrosedimentation method
  • Other methods of colouring
  • Drying of paint and varnish coverings
  • Konvektsionnye sushilnye chambers
  • Thermoradiating sushilnye chambers
  • Induction drying by currents of high frequency
  • the Choice of a method of drying
  • the Organization of painting works
  • the Choice of technological process
  • the Organization of paint and varnish works
  • Auxiliary services
  • Technological transport devices
  • Okrasochno-sushilnye modular installations
  • Safety precautions
  • Technical and economic indicators of work of painting shops
  • the Cost price of preparation of a surface
  • Economic indicators of colouring and drying
    • Colouring by pneumatic dispersion. The dispersion chamber

    you are: Colouring by pneumatic dispersion

    The dispersion chamber consists of a working zone (a zone where colouring is made), gndrofiltra where air sucked away from a working zone is cleared of particles of a paint by means of the water, catching devices and ventilating installations. мультимодальные перевозки грузов подробно на сайте москва .

    To colouring of knots, details of cars and various products of the small sizes apply raspylitelnye chambers in which painted subjects take places. The worker is out of the chamber and makes colouring through an open aperture. эвакуатор реутов .

    The chamber Case produce from angular iron and iron sheets. For installation of products in the chamber there is a rotary table or a hook under a ceiling for their suspension. Pure air arrives from shop through an open aperture, the employee and for colouring. Air polluted by steams of solvent and a painting dust, is sucked away through a crack in a back wall. Water streams in the hydrofilter carry away paint particles, water flows down in a bath, is defended and again moves to raspylitelnym to atomizers. Surplus of the polluted water merges through a pipe in the water drain. Air passes further through a separator 2 - the iron plates located under a corner 45 В° to movement of air.

    In a separator settle water and paint particles, and cleared air leaves outside. Such chamber is the chamber of periodic action: products are periodically established on a desktop, and after colouring leave from the chamber. During loading and an unloading of products the chamber actually stands idle.

    The Painting chamber of continuous action through passage. Here colouring is carried out at continuous or faltering movement of the conveyor. Within the chamber on the conveyor there is an adaptation for rotation of products for the purpose of their colouring from different directions. If because of the sizes and the form of a product they cannot be turned within the chamber arrange dual chambers in which colouring is conducted from two parties.