At colouring okunaniem products immerse in a bath with a paint for certain time; after lifting the film is formed of a bath and running off of surpluses of a paint on a product surface. Интернет-магазин обувь женская

For reception of a covering of the necessary quality at colouring by immersing it is necessary to choose viscosity of a paint and varnish material correctly. Working viscosity establish by practical consideration, adding solvents and thinners to an initial material. As painting structures being in a bath gradually get denser because of solvent evaporation it is necessary to check periodically (is better 1-2 times in change) viscosity of painting structure and to correct it. Quick-drying paints nitro-and perhlorvinilovye because of the strengthened evaporation of solvents for colouring by immersing are not applied. Colouring okunaniem is suitable for the products of the simple form supposing full running off of surpluses of a paint. If details have internal cavities or pockets for paint running off in them provide special technological apertures (drainages). недвижимость за рубежом

At immersing the product should be coated completely without air bubbles, at extraction from a bath surplus of a paint should flow down without formation of smudges. Optimum position of a product at immersing in a bath should steal up in each case by practical consideration.

For naveski painted products on the conveyor it is necessary to apply the elementary adaptations - hooks, "fur-trees" of a different design; it is not recommended to use baskets, regiments and adaptations with the big area of a surface as they carry away a paint significant amount.

Sections