you are: Thermoradiating sushilnye chambers

Speed of drying in thermoradiating chambers depends on distance from a radiator to a product surface: at distance of 100 mm the paint dries up for 3 mines, at 300 mm - for 10 mines, at 500 mm - for 36 minutes классическая мягкая мебель в каталоге москва .

Speed of drying influence thickness.) skins of products (at a thickness of walls of 2 mm duration of drying makes 3 mines, at a thickness of walls of 50 mm - 30 mines), and also a sort of a paint and its colour. The thermoradiating method of drying for melaminoalkidnyh and mochevinnyh enamels is most effective; is less effective for gliftalevyh and pentaftalevyh and even less for oil enamels; paints of black, brown, dark blue, red colours, and more slowly paints of grey, beige colours fastest dry up. To cast products with thickness of a wall more than 30 mm to apply thermoradiating drying it is not recommended. шкаф для ванной купить в россии .

At drying on suspension brackets it is necessary to complete the products having about an identical thickness of walls the form that provides uniform heating of a surface of products. стол компьютерный угловой москва .

Drying of details in baskets and protivnjah is inexpedient, as a part of a surface of the products which are in baskets and protivnjah, does not get under influence of infra-red beams and dries slowly or does not dry up at all.

At drying in thermoradiating chambers a product of a difficult configuration non-uniform drying of a paint takes place: it is observed perezhog paints on arriving parts and the slowed down drying in deepenings. To drying of products of the difficult form apply radiatsonno-konvektsionnye chambers. In sushilnyh devices of such type drying is carried out simultaneously by radiators - nagretymi panels or torches circulating air.